Microfluidics M110P Basic BioPharma

Microfluidics M110P Basic BioPharma - Nominal flow rate 80 to 120 ml/min (water) @ 30,000 psi depending on operating pressure, product characteristics and chamber selection - Operating Pressure Range of 138 to 2068 bar (2,000 to 30,000 psi) - Minimum sample Size 75 ml to continuous- One (1) Diamond Interaction Chamber (DIXC) - Chamber selection: F12Y DIXC (805.00062PH) for emulsions or G10Z DIXC (805.00034PH) for dispersions and cell rupturing - One (1) Ceramic Auxiliary Processing Module (CAPM) - Product contact surfaces include: 316/316L stainless steel, 17-4 PH stainless steel, PEEK, UHMWPE, Zirconia Ceramic, Aluminum Oxide Ceramic, Diamond, Teflon and FFKM (Kalrez or equivalent) - Enclosure is 304 stainless steel with stainless and corrosion resistant hardware - Product contact surface treatment -Surface finish and electro-polishing (EP) of product contact surfaces are done on a “best effort” basis. 20 Ra surface finish or better where possible. The small diameters of the high pressure tubing and fittings limit the ability to EP and finish totally. All stainless steel surfaces are passivated. -Document Turn Over Package (TOP)-Complete document turnover package includes manuals, drawings, material certificates and calibrations. Delivered electronically. - Sanitary tube-in-tube product heat exchanger - Process drain valve - Single acting, hydraulically driven intensifier pump - 1.5 kW (2 Hp) electric motor 110V/1Ph/60Hz, 230V/1Ph/60Hz or 220V/1Ph/50Hz - Color touchscreen interface with motor and intensifier controls - Sanitary flush diaphragm pressure transducer – NIST traceable calibration at 0, 80 and 100% of span. Certificate of calibration included. Calibration Certificate will be valid for at least one year from date of shipment. - Sanitary Inlet and outlet process thermocouples with NIST traceable calibration. Certificate of calibration included - Retransmission of applicable data (Pressure and temperature) via .CSV data log files - Emergency Stop switch - USP Class VI UHMWPE plunger seals - USP Class VI FFKM and PTFE static seals - Ceramic (Zirconia) plunger - 300 ml glass feed reservoir - Product recirculation - Electro-hydraulic power unit, air cooled - Stainless steel enclosure - All required special tools - Spare parts package - Nitrogen adapter assembly - Initial fill of filtered hydraulic oil - FAT will be performed by Microfluidics personal following standard procedure, FAT approval by customer is not required - Noise level less than or equal to 76 dBA - CE compliant